end signal
英 [end ˈsɪɡnəl]
美 [end ˈsɪɡnəl]
网络 结束信号
双语例句
- CSCF handles SIP registration of the end points and process SIP signal messaging of the appropriate application server in the service layer.
CSCF负责端点的SIP注册，并处理服务层中恰当应用服务器的SIP信号消息传递。 - The AD7762 is ideal for applications demanding high SNR without necessitating design of complex front end signal processing.
AD7762是要求高信噪比（SNR）且无需采用复杂的前端信号处理设计应用的理想器件。 - It marks the unofficial end of summer and a traditional signal that school is about to start.
它标志着九月份的非正式结束和一个传统的信号，要开学了。 - The circuit lines each have one end connected to the driving chip and the other end connected to the signal lines.
该电路线每个均具有连接至驱动芯片的一端和连接至信号线的另一端。 - A state when a particular phase relation is built between the timing signal at the receiving end and the received timing signal.
接收端定时信号与接收到的定时信号之间具有特定相位关系时的状态。 - The magnetic induction head is electrically connected with the input end of the magnetic signal amplifying test display;
磁信号放大检验显示器由小功率双运放大器耦合一个检验显示开关电路而成； - It was discussed that how to select proper method to restrain the end effects when the signal was different.
探讨了如何结合信号的不同实际特点选择不同的端点效应抑制方法。 - Its measurement signal is to lead into harmonic signal digital measurement analysis system via TA end screen voltage signal amplifier.
其测量信号是经过TA末屏电压信号放大器引入谐波信号数字测量分析系统的。 - Compared to conventional GPS signal generators ( or simulators), this model is flexibly designed and easy-to-use, in addition it provides support to the design of the GPS receiver RF front end, for the signal processing in the RF front end is simulated during the modeling.
与常规的GPS信号生成器（或模拟器）相比，这种模型设计灵活、易于使用，此外，模型构建涉及对GPS信号在接收机射频前端处理过程的仿真，从而为GPS接收机射频前端的设计提供了支持。 - A kind of new measurement system and new test method was introduced, which applies to the harmonic measurement in HV power network, which is formed by TA end screen signal amplifier and harmonic signal digital analysis system.
介绍了一种适用于高压电网谐波测量的新型测量系统及试验方法。该谐波测量系统由TA末屏信号放大器和谐波信号数字分析设备组成。 - The theory basis of nonlinear dynamical analysis of time series end three signal separation methods based on geographical information are introduced.
介绍了时间序列非线性动力学分析的理论基础及三种基于重构点集几何结构的信号分离方法。 - AP-1 which locat in the end of cascade of signal pathway is a bridge of external stimulus and cell function.
AP-1作为对外界信号发生反应的转录因子而且位于信号级联反应的末端，使外界信号和细胞功能之间建立起一定的联系。 - CATV Front-End Signal Auto-Monitor
CATV前端信号自动监测仪 - The receiving end is needed to detect the signal to restore the signal exactly.
为了准确恢复信号，接收端需进行信号检测。 - In the end, application of space-time adaptive signal processing ( STAP) in ABR is presented and the character of STAP application in different Doppler cases is discussed.
最后给出了空时二维自适应信号处理（Space-TimeAdaptiveSignalProcessing，STAP）在空载双基地雷达中的应用研究。同时讨论了不同多普勒情况下STAP的应用特点。 - At the receiver end the composite signal is separated into two paths, one for recovering the data signal by using a Nyquist filter to attenuate the clock, and the other for recovering the clock by using a high Q, narrow-band filter.
在接收端，主放电路以后分成两个通路，一通路接有一个Nyquist滤波器，只允许信号脉冲通过，另一路则接有一窄带滤波器，实现时钟信号的提取。 - This paper introduces the new method of harmonic test for HV system, adopting the end screen signal divider of TA, and through TA end screen voltage signal amplifier to lead the measurement signal into the harmonic measurement and analysis system.
文章介绍了采用TA末屏信号分压，经过TA末屏电压信号放大器将测量信号引入谐波测量分析系统的高压系统谐波测试新方法。 - The optical fiber hydrophone system including the wet end signal sensing and transfer is all fiber based, and thus has the merits of light weight, low cost and immunity to electromagnetic interference.
全光光纤水听器系统的湿端采用全光实现，信号传感与传输皆基于光纤技术.具有抗电磁干扰、重量轻和造价低等优点。 - The back end DSP processor is to process signal, including correlation, locking, tracking, and disposing.
后端DSP处理器负责中频数字信号处理，包括数字信号相关运算、GPS信号锁定、跟踪和解算等。 - In the end, the pure speech signal is obtained. Another proposed AANC system is combined with spectrum shifting. It makes use of that the car interior noise is at low frequency and separates the speech and noise in frequency domain.
另一个解决方案是基于频谱搬移技术的AANC系统，利用车内噪声的低频特性将语音与信号在频域上分离，同样达到了在降噪的同时进行语音通信的目的。 - Then the receiving end signal separation, using the combined model incentive hair and UCA-ESPRIT algorithm for target azimuth and pitching Angle relationship.
然后对接收端信号进行分离，利用联合模式激励发和UCA-ESPRIT算法来进行目标的方位角和俯仰角度的关系。 - The compensation sequences are inserted at the end of signal sequences in traditional DSI scheme, which need many times operation to satisfy the system request.
传统序列插入方案将补偿序列插入到信号序列末尾，一般需要多次插入才能满足系统的PAPR要求。 - The transfer function of the tubing systems is obtained by theoretical analysis and experiment. In the end, the distortion signal of wind tunnel test is corrected using the known tubing transfer function. 2.
通过理论分析和实验两种方法确定了测压管路频响函数，最后利用频响函数对风洞试验所测得畸变脉动风压信号进行修正。 - Receiver front end amplifies the weak signal with low noise amplifier, then use the bandpass filter to prevent the noise out of the useful signal, then amplify it to the level that can be accepted by the ADC.
接收前端把微弱的天线信号经过低噪声放大器放大，然后用带通滤波器将带外噪声滤除，再将信号进行放大，达到ADC允许的幅度。 - According to the features of end points and the extrema near the end, four shifted extrema are added to each end of the signal respectively, with the purpose of restrain the end points from divergence.
本文以信号端点及其附近极值的特征作为延拓依据，分别在信号两端各添加四个平移极值点，以此达到抑制端点发散的目的。 - At the transmitting end, the signal becomes the binary bits into the sub-carrier modulation after a logic OR gate; At the receiving end, in order to obtain the desired signal, we will put the corresponding carrier channel signal in the procession of logical AND operation.
在发射端，利用逻辑或门使得信号在进入副载波调制前变成二进制比特信息；在接收端，使用逻辑与门对相应载波信道信号进行处理，得到所需信号。 - Study on the system front end signal processing circuit is researched, focus on the use of the relay structure, solve AC/ DC switch and the signal to be measured amplitude attenuation problem.
论文对系统前端信号处理电路进行了研究，重点介绍了利用继电器结构，解决交直流切换和对被测信号幅度进行衰减的问题。 - The paper also constructed iterative steps of signal control strategy in oversaturated trunk roads, detailed design signal coordination control method for the traffic bottlenecks upstream, downstream respectively, including the start and end conditions of the signal control, signal timing adjustment method.
论文还构建了过饱和干道信号控制策略的迭代步骤，分别对交通瓶颈上游、下游实施的信号协调控制方法进行了详细设计，包括信号控制的启动与结束条件、信号配时调整方法。 - The MIMO technology is a wireless communication technology which sends a signal through multiple transmitting antennas at the transmitting end, and receives a signal through multiple receiving antennas at the receiving end.
MIMO技术是在发射端通过多个发射天线发送信号，在接收端使用多个接收天线接收信号的无线通信技术。 - As an added benefit, the matrices can be generated at the receiver end to obtain the data signal and hence it is not required to transmit side information ( SI).
另一个优点是，接收端生成矩阵来获取数据信号，所以不需要传输附加信息（SI）。